LENGTH
14.99m
HEIGHT
4.00 m (transport position)
WIDTH
3.00 m (6 rows with 45 cm rows)
3.30 m (6-rows at 50 cm width and 45-50 cm variable)
> 3.30 m (with RR-XL depending on the size of the lifting unit)
EMPTY WEIGHT
from 73,635 (33,400 kg), depending on equipment
BUNKER CAPACITY
over 43 m³ / 30 t
VOLVO PENTA TWD1683VE
796 HP/ 585 kW
16.12 L displacement
Volvo Penta 6-cylinder inline engine
Common-rail injection
EU exhaust level 5, USA TIER 4f, with SCR catalytic converter and AdBlue, maximum fuel sulphur content 15 ppm required to meet exhaust emission standard
Max. torque 3,650 Nm, 3,550 Nm from as low as 1,000 rpm, working speed 1,100 rpm, automotive up to max. 1,650 rpm
FUEL TANK
1320 L diesel
Fuel consumption displayed in l/ha and l/h in terminal
DEF TANK
145 L
EMPTY WEIGHT
from 73,635 (33,400 kg), depending on equipment
PROPERTIES
side-by-side arrangement of cooling elements for charge air and water
Hinged CVR oil cooler and air conditioning system condenser
dirt-resistant positioning of the radiator at rear top
Hydraulic oil cooler with open fan
Hydrostatically continuously driven and automatically reversible fan
TRANSMISSION
Traction drive with stepless CVR gearbox for efficient power traction
Consisting of three hydraulic motors on the compound transmission
PROPERTIES
Continuous from 0 to 40 km/h without interruption (no gear change or switching)
40 km/h in road mode at approx. 1,200 rpm, 17.5 km/h in the field at 1,240 rpm
1ST AXLE
Michelin CerexBib2 IF 800/70 R38 (20 psi)
2ND AND 3RD AXLE
Michelin MegaXBib 1050/50 R32 (27.5 psi)
OPTIONAL
Michelin CerexBib 1000/55 R32 (20 psi)
PROPERTIES
large tire contact surface protects soil and allows high operating reliability even in wet conditions and on slopes
PROPERTIES
Patented chassis design with oscillating front axle in conjunction with 2 hydraulically supported rear axles
PROPERTIES
The chassis can be inclined by 10% to the slope on each side by 6 hydraulic cylinders
Automatic slope adaption by a 3-axis gyroscope with acceleration measurement for centrifugal force compensation (optional)
CHASSIS ROLL STABILIZATION
By hydraulic compensation of the oil level in the stabilization cylinders on one side of the vehicle
PUMP DISTRIBUTOR GEARS
With pressure circulation lubrication and gear oil cooler
TRACTION DRIVE
Bosch Rexroth traction drive
OPERATING HYDRAULICS
Generously dimensioned load-sensing working hydraulic system by Bosch Rexroth, Bucher and Hydac
DRIVER'S POSITION
Sound-insulated and tinted all -round windows with blinds
Quiet stepless fan in heating and ventilation system(automatic climate control)
GRAMMER air-spring-mounted ROPA Evoluation comfort seat with heating and active ventilation
Autopilot
Cruise Control
AM/FM/CD/USB/Bluetooth/DAB+ Radio with external microphone for hands-free communication
14 liter cool box
OPERATION
R-Touch
Multi-function joystick on the right with programming buttons
Bunker operating control with joystick molded recess on the left armrest
TERMINAL
12.1" R-Touch display on the operating console
12.1" R-Touch display on the left A-pillar
Machine diagnosis including DM1 error messages from the diesel engine in plain text fully integrated
LIGHTING
2 LED interior lights
WINDOW WIPERS
Wide-area window wiper
CAMERA
The relevant camera image is automatically displayed on the left R-Touch display while reversing or when unloading the bunker.
RIS
Integral defoliator unit with leaf spreading between beet rows
With depth-control wheels
RISU
Integral defoliator unit with leaf spreading between beet rows
Without depth-control wheels
RR LIFTING UNIT
Row configuration:
6 row 30" spacing or
8-9 row 22" spacing or
9 row 20" spacing
Hydraulic share depth adjustment of the individual rows
Hydraulic stone protection
85 cm depth-control wheels
7 lifting rollers
Fast stepless oscillating share drive by axial-piston motor
Adjustable taper roller bearings in oscillating share drive and lifting gears
Excellent view of lifting unit and scalper with no additional cameras
MAINTENANCE POSITION
Allows the defoliator and the lifting group to be raised 90 degrees for simple inspection and service of defoliator knives, scalper knife and lifting shares
INFEED CONVEYOR
800 mm wide
50 mm pitch
1ST STRAINER WHEEL
1,740 mm diameter
Strainer wheel with forged tines
6 offset strainer wheel tines
2ND AND 3RD STRAINER WHEELS
1,500 mm diameter
Strainer wheel with forged tines
4 offset strainer wheel tines per wheel
GUIDE GRIDS
height independently adjustable at 1st, 2nd, 3rd strainer wheel can be independently adjusted
guide grids can be replaced with spring tines segment by segment
ELEVATOR
1000 mm wide
VEHICLE POWER SUPPLY
24 Volt
ALTERNATOR
150 A
OUTLETS
1 - 12 V outlet on the seat console
1 - 24 V outlet on the seat console
2 - USB double sockets 5V / 3.6A (USB-A and USB-C) in the roof console
PROPERTIES
CAN-bus computer system with integrated diagnosis of all components connected to the terminal
Software can be updated at USB port
HEADLIGHTS
2 Hella C140 LED main headlights at the front on the defoliator unit
6 LED working floodlights (1,700 lumen) Hella LED Oval 90 on cabin roof
23 LED working floodlights (1,800 lumen) Nordic Lights
4 LED spotlights for lighting the engine compartment
ROTATING BEACONS
Hella RotaLED Compact
PROPERTIES
Coming-home function
PROPERTIES
Triple-fold conveyor for even easier establishment of 10 meter-wide clamps
Gentle PU fingers for high output and short unloading times
The speed of both conveyors is steplessly adjustable
Long conveyor with speed switch
UNLOADING CONVEYOR WIDTH
200 cm for even easier unloading to trailer
BUNKER UNLOADING
in less than one minute
OVERLOADING HEIGHT
up to 4.00 m
PROPERTIES
Bunker contents are measured with 2 ultrasonic sensors
The total bunker loads (including partly loaded) are automatically recorded in the database
STANDARD EQUIPMENT
Central lubricating system
Fuel consumption measurement
Automatic climate control1 digital camera as rear view camera
1 digital camera for strainer wheels unit
R-Connect telematics module including SIM card
Hard-coated scalper flails
Lifting rollers with a hard-welded finish
Cleaner on elevator rubber
40 km/h
Manual slope compensation R-Balance
OTHER EQUIPMENT OPTIONS
Automatic slope compensation R-Balance
R-Contour (automatic share depth adjustment of the individual rows with ground contour recording)
R-Trim (automatic scalper height adjustment)
Defoliator blade reinforced for integral defoliator
Defoliator with combi shaft instead of standard defoliator shaft
Leaf spreader in stone protection version
Leaf pile equipment (defoliators with leaf ejection only)
Inflow sheet with skid on the scalper
Widia forged lifting shares
Data printer
R-Transfer PROFESSIONAL
R-Transfer BASIC
R-View video system (bird's-eye view)
1 digital camera for intermediate belt
1 digital camera for unload conveyor
1 digital camera for sugar beet crop on cabin roof
R-Connect Monitor
Slip-free driving speed measurement
2 LED headlights (4,200 lumen apiece) on the mirror brackets
4 LED headlights (4,500 lumen apiece) on the mirror brackets
Strainer wheel segments optionally with spring tines or guide grids on strainer wheels 1-3
Agitator in 2nd strainer wheel
Push-off grid 2nd strainer wheel in standard, stone or spring tine design
Limit sensor on diesel tank
Additional chassis (required in Germany)
Reduction of maximum speed from 40 km/h to 32 km/h
Chicory equipment
Contour marking package