LENGTH
14.97m
HEIGHT
4.00 m
WIDTH
3.00 m
EMPTY WEIGHT
With a full tank:
From 67,020.528 to 69,666.075 lb (30,400 to 31,600 kg) depending on equipment
Permitted total weight 70,547.924 lb (32,000 kg), 4-axle
ENGINE
Mercedes Benz OM 936 LA 6-cylinder inline engine with AdBlue, SCR-cat and particle filter
EXHAUST GAS CATEGORY
EU exhaust gas V with 1,450 Nm max. torque at 1,200 rpm.
USA Tier 4 final with 1,400 Nm max. torque at 1,200 rpm.
DISPLACEMENT
7.7 liters 260 kW (354 hp)
2-stage turbo charging
FUEL CAPACITY
Diesel 1,225 liters
AdBlue 95 liters
PROPERTIES
Fully electronic engine control unit with fuel consumption evaluation on R-Touch display
Automatically reversing hydrostatic fan drive controlled depending on ambient temperature
1 flat-belt drive with automatic belt tensioner
Wear-free constant throttle brake prevents the diesel engine from overrevving
Automatic engine shut-off if operating states could potentially cause damage
Engine diagnostic system integrated in R-Touch display
Electric pump for automatic venting of the fuel system
DRIVING SPEED
Driving speed 32 km/h
Optional driving mode 40 km/h with 2 engines
BRAKE
Front axle with drum brake 500x180 duplex
Rear axle with drum brake 500x120 simplex
4 spring-loaded brake cylinders for service and parking brake
PROPERTIES
Stepless hydrostatic 4-gear OMSI transmission (Bosch-Rexroth) to 2 OMSI planetary steering axles
The drive pump alone can transmit the full power of the diesel engine
2 separately actuated differential locks with automatic function
Automatic all-wheel switching
Cruise control
Speed-reduced driving in automotive driving mode
The load feed is controlled by very fine actuation of super crawling speed
STEERING
Front axle steering
Rear axle steering
All-wheel steering
Main steering switch activates automatic mid-positioning of the rear axle
TURNING RADIUS
9.90 m inner diameter
EQUIPMENT
Hella C140 LED main headlights at the front, 2 pcs.
Hella LED Oval 90 LED working headlights (1,700 lumen each) on the cabin roof, 11 pcs.
Nordic Lights Scorpius GO 420 LED working floodlights (1,800 lumen each) on the machine, 13 pcs.
LED rotating beacons Hella RotaLED Compact
PUMP DISTRIBUTOR GEARS
OMSI pump distributor gears
Pressure circulating lubrication
With gear oil cooler
Gear ratios adjusted for reduced engine speed during loading from 1,150 rpm
Automotive mode for control of the diesel engine speed when loading
HYDRAULIC SYSTEM
Powershift multiple disc clutch to switch 6 hydraulic pumps of the operating drives -> thus, easier start of diesel engine even at very low outside temperatures
4 axial-piston pumps (Bosch-Rexroth) for continuous and separate rotating speed adjustment and reversing of roller drives (pickup, out and in flow, additional cleaning)
2 axial-piston pumps (Bosch-Rexroth) for continuous drive of infeed and truck conveyors
1 Load-Sensing axial-piston pump (Bosch-Rexroth) to feed all hydraulic cylinders -> all the movements are performed at the same time by LVS directional valves with flow dividing principle.
1 axial-piston pump (Bosch-Rexroth) for reversible fan drive (hydraulic oil, water, charge air cooler)
Hydraulic motors from Danfoss
PICKUP WIDTH
Maximum 10.2 m
ROPA ROLLER PICKUP
18 rollers
Split into 3 separately driven units (each drive has a continuous rpm control and automatic reversing for all rollers (patented pickup system))
1. PICKUP
2 carbide tipped finger rollers operate up to a depth of 7 cm
2 hard-coated cleaner rollers
Finger rollers: The highest service life due to integrated tapered roller bearing and slide ring sealing
Cleaning rollers: 8-corner disks consisting of forged half-shells
2. OUTWARD FLOW
6 hard-coated conveyor rollers transport outward, dividing the beet flow
Integrated, adjustable tapered roller bearing guarantees lifelong operation of the roller without replacement of bearing
3. INWARD FLOW
8 counter-rotating hard-coated pinch rollers guide inward => doubled cleaning path;
All pinch rollers made of seamless cold-drawn, extremely rigid special pipe, Ø 138.5 mm, 8 mm wall strength
CENTRAL MARK
Central mark with proven, zero-backlash drive
Rotating speed adjusted automatically depending on the conveyor rollers
Slow-running for low wear of divided central mark hood
Safety valve to prevent shearing of safety chains if not attached
RESIDUAL BEET PICKUP
Telescoping and proportionally controlled residual beet pickup
Telescopic outer tine 180x180x5 mm
CAMERA
Digital camera and R-Touch display for monitoring pickup depth
FROST BREAKERS
In center of pickup and side sections
CLEANING AND LOADING CAPACITY
Up to more than 560 tons per loading hour
TOTAL CLEANING AREA
Approx. 35 m²
MAXIMUM CLEANING PATH
Approx. 31.70 m
INFEED CONVEYOR
80 cm wide
50 mm pitch with specially molded PU fingers and soil deflectors
Double profile beltsfor rotational speed monitoring
Quick motion switch (doubles the belt speed) for sieve conveyor self-cleaning in case of heavily sticky soil
15 mm wear-resistant side walls of PU plates
Open frame construction (Y-frame) so that soil from infeed conveyor ejection does not remain on the main frame
RECLEANING
Standard:
Sieve conveyor, 90 cm wide, 40 mm pitch
Optional:
- pinch roller cleaning with 8 counter-rotating rollers, 1,150 mm inner width, 1,300 outer width, rollers are constructively identical to pinch rollers of pickup
- stone remover, combination of sieve conveyor followed by roller cleaner (10 PU cleaning rollers + 2 stone remover rollers), variable speed adjustment for cleaning rollers, variable adjustment of speed and direction of rotation for stone remover rollers
OVERLOADING HEIGHT
up to 6.0 m
OVERLOADING REACH
up to 15.0 m
PROPERTIES
80 cm wide
40 mm pitch
With speed monitoring and quick motion switch
15 mm wear-resistant side walls of PU plates can be turned and replaced
Backstop
LENGTH
9.02 m
PROPERTIES
6 meters to articulation point
Bottom plate in fuel tank of 15 mm steel
EQUIPMENT
24 Volt
Alternator with 150 A
Electronic main battery switch with automatic shut-off after ignition OFF for 5 days
OUTLETS
In the seat console:
1x 12V power outlet
1 x 24V outlet
USB double socket 5V / 3.6A (USB-A and USB-C)
In the roof console:
USB double socket 5V / 3.6A (USB-A and USB-C)
In the engine compartment and at the rear:
1 x 24V outlet
SAFETY
Long-lasting, waterproof, anticorrosion structure of on-board electrical system
Warnings are displayed as icon with text in the applicable language
Wiring harness mostly wrapped with protective covering
PROPERTIES
Diagnostic system for all sensors and actuators integrated in both R-Touch displays
Software updates can be uploaded via standard USB port
Single-lead sealed plugs (AMP, German) used exclusively
Central electrical system wired with WAGO spring-clamp terminals (vibration-proof)
3 identical Hydac TTC modules (can be replaced if pin is not assigned!)
SWITCH TO OPERATING POSITION
With a single operating component you can switch automatically from road drive mode into operating mode in just one minute
FRONT AND REAR AXLES
Standard:
Michelin 710/75 R34 MegaXBib2 (outer width 3.00 m)
Optional:
Michelin IF 800/70 R32 CerexBib2 (outer width 3.26 m)
LIFTING AXLE
Two hydraulically sprung additional axles with 235/75 R17.5 tires
STANDARD
Rear view camera
Depth guide camera
Central lubricating system
Automatic air conditioning with park heating and underfloor heating
Comfort seat with heating and active ventilation
AM/FM/CD/USB/Bluetooth/DAB+ Radio2 USB portsHella LED road lighting
Electrically adjustable mirror
Tool kit
All rollers hard-coated
Pickup rollers with Widia pickup fingers
ADDITIONAL EQUIPMENT
Pinch roller recleaner with 8 counter-rotating
hard-coated pinch rollers
Stone remover ▷ consisting of sieve conveyor followed by roller cleaner
10 PU cleaning rollers + 2 stone removal rollers
Water spray system for roller cleaning and recleaner with 400 liter water tank
Water spray system duo for roller cleaning and recleaner with 400 liter water tank (2 valves per pickup side part, extended number of nozzles on the pickup, 2 valves on the pinch roller recleaner)
Digital camera on truck conveyor
Digital camera at the recleaner
R-View with two additional side cameras for rear area monitoring
Holding device on steering wheel
CAN interface with USB transformer for TMS device
40 km/h top speed - model with 2 traction drive engines
Storage compartment 1000 x 600 x 600 mm V2A behind rear axle
Weighing system with CAN bus weighing cells