| Engine: |
DaimlerChrysler (Mercedes)V8 diesel engine OM502LA, 444 kw (604 HP) at 1690 r/min. operating speed at 1,250 r/min, max 1,650 1/min, fully electronic steering with fuel consumption display l/ha and l/h at the terminal. |
Tank capacity: |
380 gal (1440 litres), separate connection to filling by tanker |
| Transmission: |
Continuous hydrostatic propulsion via 2-gear drive with all-wheel switching
1st gear 0 -13.5 km/h
2nd gear 0 – 20 km/h, or 25 km/hr (optional)
3 mechanically operated axles with differential locking, axle load control for the 3rd axle, lockable
hydraulic hillside stabilisation on the front axle, automotive driving and harvesting, top load control,
pressure cut-off |
| Cabin: |
Sound-proof tinted all-round glazing, heating and ventilation system with climate control air-conditioning,
Console with colour terminal, joystick operation, autopilot,
Cruise control, engine control, comfortable air-sprung Grammer seat
|
| Tires: |
1st axle
800/65 R 32
900/55 R 32 optional, only possible for row widths of 50 cm
900/60 R 32 only for 6 x 30” and 8/9 row lifting units
1050/50 R 32 only for 6 x 30“ and 8/9 row lifting units
2nd axle
1050/50 R 32
3rd axle
1000/50 R 25 |
| Capacity: |
Up to 2 ha/hr (6-row); up to more than 2.5 ha/hr (PR-XL 8-/9 row)
|
| Beet tank volume: |
approx 40m3, equivalent to approx 26-29 tons (55 cubic yards)
|
| Transfer / Unloading height: |
up to 3.80 m
|
Topping unit: |
PISh with integral flail without leaf ejection, leaf mulched and deposited between the beet rows
Optional:
PBSH with left side leaf ejection, only for 6-/8 row 45 cm a/o 50 cm row width
PBSOh with left side leaf ejection and 4 sensor wheels at the flail |
| Lifting unit: |
6-row with 45 cm or 50 cm row widths, optional: variable 45-50 cm
PR-XL:
6-row with 30”
8-row with 45 cm, 50 cm or 22”
9-row with 45 cm, 50 cm or 20” |
| Cleaning: |
transfer conveyer 800 mm wide, pitch 55 mm or 60 mm
1st turbine 1.700 mm dia. / 2nd and 3rd turbine 1.500 mm dia.
elevator 900 mm wide
|
| Electrical equipment: |
Integrated net 24 volt, 2 light units of 100 amps. each
32 super beam working lights of 70 watts each, 2 x 12 volt sockets for radio / telephone communication
etc, CAN-BUS computer system with integrated diagnostic facility for all components connected
to the terminal, software update possible by laptop |
| Dimensions: |
Length: 14.95 m
Height: 4.00 m (transport position)
Width: 3.00 m (6-row at 45 cm row)
3.30 m (6-row at 50 cm per row and 45-50 cm variable)
|
| Standard equipment: |
Central lubrication system, job assessment at terminal, inc. of fuel consumption counter, climate control air conditioning
|
| Optional: |
Widia shares, 25 km/h version, camera for turbines, camera for unloading conveyer, 2 LCD colour monitors, spring tines in turbines1-3, bumper wheel in turbine 2, 4th axle (compulsory in Germany), data printer, data read-out via USB, data input and read-out with job processing via USB, GPS speed sensor, leaf collection device (only for PBSh flails), additional hydraulic pump 45 cm3 for additional equipment, bio-hydraulic oil, critical value indicator at diesel tank, air-brake transporter for PR-XL harvesting units and hydraulic fast coupling facility, chicory equipment |
|
Tested by TÜV and commercial
cooperative, corresponding
with CE regulations. Subject
to technical alterations.
|
Download
