Technical Specifications

Engine:	Daimler Chrysler diesel engine OM 926 LA exhaust norm EURO-MOT IIIa, 6-cylinder linear engine with 220 kW/299 HP at 2200 RPM, max. torque of 1200 Nm at 1300-1600 RPM, cubic capacity 7,201 ccm, fully electronic steering with fuel consumption accessed at the terminal, temperature dependant adjustable and reversible hydrostatic ventilator drive, flat belt alternator drive with automatic belt tensioning.
Fuel Tank Volume:	353 gal (1340L)
Propulsion	Continuous hydrostatic propulsion with 4-gear drive, 2 separately activated differential locks, cruise control, automotive driving on roads, speed regulation through electronic steering when in crawling gear. Speed: 0-20 km/hr; optional 25 km/hr.
Hydraulic System:	Pump distributor gear with load-adjustable multiple disc clutch for activating all pumps (easy starting of the diesel engine even at extremely low outer temperatures), pressure circuit lubrication with monitor of the lubricating oil level, adjustable drive transfer for reducing revolutions at loading, a load sensing pump for feeding the entire hydraulic system, 3 axial piston pumps (for the speed adjustable and reversible roller drives) large propulsion pumps for speed-reduced driving on roads in automotive mode.
Steering:	Front axle steering, rear axle steering, turning, automatic mid-position with display at the terminal, turning angle front 30°, rear 32°.
Turning Radius:	8.30 m inner turning circle.
Cabin:	Sound-proof, all-round view cabin with tinted glazing and low line vision, control panel at rotating seat with integrated colour terminal, function keys with selector dial, 2 proportionally driven multi-function joysticks, engine monitoring at the terminal, air-conditioning unit, rotating and air-sprung comfort seat with lock, MP3-CD radio with audio system, 60 l storage cubicle in the cabin back wall, screen wipers front, left, right and rear.
Cleaning / Loading Capacity:	Up to 435 tonnes per hour loading
Maximum Collection Width:	8.70 m
Collection:	8.70 m wide patented ROPA roller collection, 18 rollers with speed adjustment and automatic reversing facility, (2 finger rollers working up to 7 cm deep, 2 cleaning roller, 4 conveying rollers direct beet outwards, 2 conical rollers separate the beet flow, 8 tangentially rotating spiral rollers direct beet inwards => double cleaning path), eccentrically driven nosecone, telescopic and proportional driven collector arm for remaining beet, oil flow mainly in the hydraulic pipes, colour camera and LCD colour monitor for monitoring lifting depth.
In-feed Web:	80 cm wide, 50 mm separation with PU-collector cleats and dirt flaps, double-cam belt
Cleaning:	Standard: transfer conveyer, 90 cm wide, 40 mm or 50 mm pitch Special version: spiral roller cleaner with 8 tangentially rotating rollers, 125 cm wide
Total Cleaning Area:	28.64 m² with transfer conveyer; 29.48 m² with spiral roller cleaner
Cleaning Path Length :	23.8 m (standard elevator) or 25.3 (extended elevator)
Loading Height:	Up to 6m
Loading Width:	11.5 m (standard elevator) Optional 13 m (extended elevator)
Electrical Equipment:	24 volt, 2 light units with 100 amps each, 12 volt sockets, 2x24 volt sockets
Driving on Roads and Working Mode:	The switch-over from road transport to working mode takes appr. 2 minutes.
Dimension during road transport:	Length: 13 m; width 3 m; height 4 m
Weight:	Depending on type, from 23 500 kg
Tires:	710-75 R34, load index 178 A8, 3rd axle (compulsory in Germany) 235/75 R17.5
Standard Equipment:	Central lubrication, collection arm for remaining beet, air-conditioning, on-board tools
Optional Equipment:	Spiral roller cleaning with 8 tangentially rotating rollers, 13 m elevator, stationary heater, 25 km/h version, 3rd axle (compulsory in Germany), elevator camera, data export by USB stick, weighing facility, cross over rollers.
	Officially accepted by TÜV and the employer's liability insurance association. It also satisfies the CE directives. We reserve ourselves the right to make technical changes. Made in Germany

| top of page |